16219 Results for: "Dow+Corning®+3145+Mil-A-46146+Adhesive+Sealant+Grey"

Supplier: GREEFF RW SILICONES LUBRICAN

Non-flowing adhesive, high tensile strength and elongation, enhanced thermal stability, MIL-A-46146

Supplier: DOW CORNING

This silicone-based clear translucent grey coloured compound is used as sealant and lubricant for vacuum systems.

Supplier: DOW CORNING

A grease-like silicone material, thickened with heat conductive metal oxides.

Supplier: GREEFF RW SILICONES LUBRICAN

General-purpose acetoxy RTV sealant. Meets the requirements of 21 CFR Section 177.2600: "Rubber articles intended for repeated use".

Supplier: DOW CORNING

Lubrication for control and pressure plug valves, water softener and faucet valves. Sealant for vacuum and pressure systems and outdoor equipment (also shipboard) subject to washing and harsh environmental exposure, such as meters, electrical service entrance and underground connections.

Supplier: DOW CORNING

Grey translucent silicone compound

Supplier: 3M

Scotch-Weld™ Epoxy adhesive DP190 is a two-part epoxy adhesive that delivers exceptional performance with high shear and peel strength. Extremely compatible, it is formulated to bond to a wide range of materials, including metals, ceramics, wood, fibreboard, glass, rubber, and many plastics.

Supplier: Merck

Silane A 174 (also known as Polyfix® 100, methacryloxypropyl trimethoxysilane) is an adhesion promoter. Has a molar mass 248,35 g/mol.

Supplier: Thermo Fisher Scientific

High temperature adhesive for bonding ceramic to metal.

Supplier: Avantor Fluid Handling

Platinum-cured silicone tubing with a very low extractable profile.

Supplier: Thermo Fisher Scientific

Decamethylcyclopentasiloxane 97%

Supplier: Thermo Fisher Scientific

Octamethylcyclotetrasiloxane 98

Supplier: Merck

Octamethylcyclotetrasiloxane for synthesis, Sigma-Aldrich®

Supplier: Avantor Fluid Handling

Pharma tubing remains flexible and resilient for long service life.

Supplier: Thermo Fisher Scientific

High-vacuum grease is used as an anti-seize grease in ground glass joints and to lubricate synthetic and silicone rubber gaskets. Also used to lubricate water-treating equipment, laboratory equipment, lubricate O-rings on binoculars and telescopes and to prevent fogging of delicate lenses.

Supplier: Avantor Fluid Handling

Pharma tubing remains flexible and resilient for long service life.

Supplier: Thermo Fisher Scientific

Octamethylcyclotetrasiloxane 98%

Supplier: Thermo Fisher Scientific

Decamethylcyclopentasiloxane 97

Supplier: Thermo Fisher Scientific

Sodium metasilicate is used as a starting material for zeolites and silica catalysts. It acts as an adhesive and binder, corrosion inhibitor, penetrating sealant, coagulant in waste water treatment, fixative for hand dyeing with reactive dye and detergent auxiliaries.

Supplier: DOW CORNING

Transparent straw colour resin of 75% silicone in toluene, providing a tack free, protective, thin film coating in 15 minutes at room temperature.

Supplier: DOW CORNING

High strength silicone moldmaking rubber.

Supplier: SIGMA ALDRICH MICROSCOPY

This is a mounting medium (contains 45% acrylic resin and 55% xylenes) used in microscopy. It is an adhesive and specimen preservative that can be used manually and in automated coverslipping equipment. Special purpose adhesive and sealant for use with glass, non plastic and other non-reactive materials.

Supplier: Biotium

EverBrite™ mounting media are anti-fade mountants for preserving fluorescence during microscopy. EverBrite™ mounting media prevent rapid photobleaching of fluorescein, rhodamine, and cyanine based dyes and are optimally formulated for use with Biotum’s CF™ dye conjugates. Unlike Vectashield® EverBrite™ mounting media is compatible with Cy® dyes such as Cy®2, Cy®3 and Cy®5. EverBrite™ mounting medium is a wet-set medium while EverBrite™ hardset mounting medium cures overnight to form a hard permanent seal with the coverslip, eliminating the need to seal coverslip edges with nail polish or other sealants. Both formulations are available with DAPI for blue fluorescent nuclear counterstaining without an additional staining step.

Supplier: GREEFF RW SILICONES LUBRICAN

Dow Corning silicone 10:1 encapsulants for electronics are supplied in two parts as lot-matched base and curing agent that are mixed in a ratio of 10 parts base to one part curing agent, by weight.

Supplier: DOW CORNING

Clear low volatility fluorosilicone especially suitable for foam control in chlorinated solvents

Supplier: 3M

Manual applicator for dispensing EPX adhesive in 38 and 50 ml cartridges supplied with two plungers for 1:1/2:1 and 10:1 adhesive.

Supplier: DOW CORNING

Dow Corning® 3-4241 Dielectric Tough Gel Clear-Green is a two component, heat curing, silicone gel that is used for electrical insulation and protecting electrical components from contaminants, moisture, and stress.

Supplier: 3M

3M™ Scotch-Weld™ Structural adhesive nozzles are for use with 3M EPX™ Duo-Pak adhesives to ensure correct mixing of adhesive parts. Nozzle is matched to adhesive.

Supplier: Merck

Decamethylcyclopentasiloxane, Sigma-Aldrich®

Supplier: 3M

This is an extremely versatile, fast-drying, and transparent spray adhesive that bonds a wide range of lightweight materials. The permanent bond provides fast results to keep projects moving ahead. The spray formula is easy to dispense and apply directly onto surfaces and materials where needed.