You searched for: Air Samplers
The air can be a serious contamination source, so it is essential for your lab or food processing facility to regularly evaluate the quality of the environment with air samplers. Monitor indoor air quality to ensure viable levels of CO2, humidity, dew point, air temperature, and wet bulb temperature. Sample air by volume for higher accuracy and reproducibility. Graduated glass filter models are designed for use when sampling air volumes at low jet velocity.
VWR® SAS Super IAQ Air Samplers
Supplier: VWR Collection
The SAS Super IAQ provides the same efficiency as recorded by sampling tests conducted by Centre for Applied Microbiology & Research (CAMR-UK).
Expand 2 Items
VWR® SAS Super Pinocchio II Air Sampler for Compressed Gases
Supplier: VWR Collection
SAS Super Pinocchio II is a microbial impaction sampler to test the quality of compressed air and gases used in cleanrooms. A compressed air source is connected and the flow meter regulated to achieve the required flow rate.
Expand 4 Items
Air sampler, MAS-100 NT® Ex
Supplier: Merck
The MAS-100 NT® Ex combines all the advantages of the MAS-100 NT® but, in addition, has been tested for use in areas where there are explosive atmospheres.
Expand 4 Items
VWR® SAS Super DUO 360 Air Samplers
Supplier: VWR Collection
When environmental contamination is very low, and the number of samples to be performed is high, operational duration can be an important factor in the choice of SAS instrument. Two sampling heads that operate simultaneously to sample 1000 litres of air, in less than 3 minutes, is the solution.
Expand 2 Items
VWR® SAS Super Pinocchio CR Air Sampler for Compressed Gas
Supplier: VWR Collection
SAS Super Pinocchio CR is a compact microbial impaction sampler designed to test the quality of compressed air and gases used in cleanrooms. A compressed air source is connected and a flow meter to regulate and achieve the required flow rate.
Expand 5 Items
Microbial air samplers, Mas-100 Iso Mh®
Supplier: Merck
Highest collection efficiency and safety in isolators and rabs with up to four sampling points.
Expand 10 Items
VWR®, Single-Use Heads for Air Samplers
Supplier: VWR Collection
Environmental monitoring in cleanrooms is important and a critical part of the production chain for a manufacturing company.
Expand 2 Items
VWR® SAS Super ISO Air Samplers
Supplier: VWR Collection
SAS Super ISO 100 and SAS Super ISO 180 are differentiated by their airflow; this choice depends on the application, and allows continuous or sequential sampling from a few minutes to several hours. The data can be stored on the SAS instrument itself or on any remote PC.
Expand 4 Items
Air sampler, MAS-100 NT®
Supplier: Merck
The perforated sampling head may be sterilised and can be adjusted to sample horizontally.
Expand 2 Items
Air sampler, MAS-100 Eco®
Supplier: Merck
The MAS-100 Eco® is a robust and reliable air sampler designed for highest precision.
Expand 1 Items
Air samplers, MAS-100 Iso NT®
Supplier: Merck
The MAS-100 Iso NT® is a high-performance instrument based on the impaction principle. The head (using standard 90 mm Petri dishes) can be installed at the critical control points with all electronic and moving parts kept outside the critical zone.
Expand 3 Items
Air sampler, MAS-100 VF
Supplier: Merck
The MAS-100 VF® uses standard Petri dishes for monitoring the quality of your environment. Its electronic speed control maintains an accurate flow rate. The handle enables the sampler to be mounted onto an optional tripod, thereby allowing testing at different angles for fixed applications. The perforated lid is the same as on the standard MAS-100® sampler.
Expand 1 Items
VWR® SAS Super Isolator Air Samplers
Supplier: VWR Collection
The SAS instrument control unit is placed outside and connected to the aspirating head using a simple electrical connection. All possible typical contamination sources from the vacuum sampling system are avoided using the SAS Super Isolator. An interesting application is that several heads can be controlled by a single SAS control unit, providing a practical and economical solution.
Expand 6 Items
Air sampler, Coriolis®
Supplier: Bertin Instruments
Coriolis® μ is a portable biological air sampler for indoor or outdoor air bio-contamination monitoring. The equipment concentrates airborne particles in a liquid sample that can be analysed afterwards using microbiological techniques.
Expand 1 Items
OVS sampling tubes, ORBO™
Supplier: Merck
The OSHA Versatile Sampler (OVS) is a unique tube design with the adsorbent and filter combined in one tube for collection of both vapors and aerosols.
Expand 2 Items
Air sampler, Coriolis® COMPACT
Supplier: Bertin Instruments
Portable dry air sampler for bio contamination control.
Expand 1 Items
PUF cartridges, ORBO™
Supplier: Merck
Several EPA and ASTM methods require a polyurethane foam (PUF) cartridge for monitoring semi-volatiles in stack, ambient, indoor, and workplace atmospheres.
Expand 3 Items
Air Sampler, MD8
Supplier: Sartorius
MD8 air samplers, MD8 airscan and portable AirPort MD8 for detection of airborne microorganisms.
Expand 1 Items
Automatic Air Sampling Pump
Supplier: GASTEC
Compact, lightweight, and reliable automatic air sampling pump for GASTEC detector tubes and sorbent tubes.
Expand 1 Items
Miniature passive air samplers
Supplier: Restek
These air samplers provide accurate integrated sampling via small fittings that easily connect to miniature canisters.
Expand 8 Items
Grab passive air samplers
Supplier: Restek
These grab air samplers are suitable for use with canisters.
Expand 16 Items
Passive air sampling kits
Supplier: Restek
This unique grab sampler minimises connections and leaks and houses a critical orifice in the tee fitting.
Expand 6 Items
Passive air samplers
Supplier: Restek
These passive air samplers provide accurate integrated sampling without a sampling pump.
Expand 12 Items
Humidification chamber
Supplier: Restek
It is important to use humidified air or nitrogen to help remove volatile organic contaminants when cleaning SilcoCan® or TO-Can® canisters.
Expand 1 Items
Miniature air sampling canisters
Supplier: Restek
These small canisters are designed for controlled sampling, as an alternative to tube and pump samplers.
Expand 12 Items
Replacement parts for passive air samplers
Supplier: Restek
Sample inlet, 38 mm, Stainless steel
Expand 22 Items
Raw polyurethane foam (PUF) plugs and glass holder
Supplier: Restek
PUF plugs fits to glass holders as an alternative to pre-cleaned packed cartridges.
Expand 2 Items
Cleaned foam cartridges
Supplier: Restek
These precleaned cartridges are suitable for the air sampling during ambient, indoor and industrial hygiene applications.