You searched for: Membrane Filter Units

Supplier: Merck

The Sterivex™ filter unit has a compact design ideal for large volume filtration using positive pressure.

Supplier: Merck

The Sterivex™ filter unit has a compact design ideal for large volume filtration using positive pressure.

Supplier: Merck

Steripak-GP filter units are designed for larger scale pressure-driven filtration of tissue culture media with or without serum. They are single use and are not autoclavable. The filter units come in two sizes, with the smaller unit able to filter up to 10 L and the larger up to 20 L.

Supplier: DWK Life Sciences

Filtration apparatus with unit made from clear DURAN® borosilicate glass 3.3, PTFE insert and anodised aluminium clamp.

Supplier: Sartorius

The Sterisart® NF System is a completely disposable technology based on the membrane filtration method, for the sterility testing of pharmaceutical products. It makes aseptic sampling easy, during or after incubation which is required for dilution or rapid detection, or for the supplement of additives for inactivation of antibiotics.

Supplier: Sartorius

BioSart® 100 monitors have been specifically designed for the detection and enumeration of microorganisms in beverages, water, pharmaceuticals, cosmetics, foods and other liquids. These sterile devices with PS housing and incorporated membrane filter and cellulose pad are ready to use.

Supplier: Whatman products (Cytiva)

MBS I is an excellent system for optimal microbiological control using membranes. The overall procedure time is reduced to a minimum. The design of the system, which consists of an electrical membrane dispenser, a funnel dispenser, and a vacuum manifold, leads to more reproducible results. All components are sold separately. The modular system provides flexibility to select the hardware and accessories that best suit the unique and varied workflows of the user.
The special sealing technique ensures easy handling and high integrity of the funnel and membrane during filtration. This keeps any cross-contamination to a minimum.

Supplier: Whatman products (Cytiva)

Pressure filtration devices with a sample loading cylinder are suitable for batch filtration of samples from 20 ml. Devices without infusion cylinders are connected inline and are suitable for larger volumes of several liters.

Supplier: DWK Life Sciences

The 25 mm vacuum microfiltration assembly is designed to handle small volumes of liquids for analysis of particulate or microbiological contamination. It has a stainless steel support and is used for filtering viscous or proteinaceous solutions or to produce ultra-clean filtrate.

Supplier: Whatman products (Cytiva)

The microbiological filtration system is used for optimal microbiological control using membranes. The design of the system, which consists of an electrical membrane dispenser, a funnel dispenser, and a vacuum manifold, leads to more reproducible results.

Supplier: DWK Life Sciences

This microfiltration system manufactured from 33 expansion, low extractable borosilicate glass eliminates pouring HPLC solvents into funnels. The solvent pickup adapter draws solvent directly from a reagent bottle through a 47 mm filter and into a filter flask.

Supplier: DWK Life Sciences

These vacuum microfiltration assemblies are manufactured from 33 expansion, low extractable borosilicate glass. The 47 mm vacuum microfiltration assembly is used for general filtration and is designed to handle up to 500 ml of sample liquids for the analysis of particulate or microbiological contamination. The 90 mm vacuum microfiltration assembly is designed for large sample volumes or samples with high particulate loads that would tend to clog a 47 mm diameter filter. The assembly with fritted glass support is used for general filtration.

Supplier: Merck

Milligard^® PES 1.2/0.8 μm filters are designed for reliable particulate removal from a broad range of fluid streams. When used upstream of sterilizing-grade filters or other unit operations, they improve processing efficiency. Milligard^® PES filters are supported by the Emprove^® Program which consolidates product specific testing, quality and regulatory information to simplify compliance needs.

Supplier: DWK Life Sciences

This microfiltration adapter assembly is designed to allow connection of a 47 or 90 mm filtration support base with a straight drip tip to a bottle or reservoir with a GL 45 thread.

Supplier: Merck

MicropreSure on-line filtration sampler improves in-process microbiological testing for bottled water. It uses the pressure in tanks or pressurized lines to process and collect samples through a microporous membrane within an enclosed chamber, securely locked without leaks.

Supplier: Roth Carl

These flow-through filters are made of PTFE. The filter membrane can be replaced easily by unscrewing the sample funnel. Plastic tubing can be connected with olives.