You searched for: Vacuum Diaphragm Pumps

Supplier: VWR Collection

VCP 80 and VCP 130 can be used as vacuum and pressure pumps, and set a standard for efficient vacuum use. Use these pumps as an affordable vacuuming application where corrosion resistance is not required. These pumps can be used for vacuum filtration of aqueous solutions, or aqueous fumes including buffers, but are not recommended for pumping acidic, basic or organic fumes. These VWR® Collection vacuum/pressure pumps are designed for continuous unattended operation, and have two dial gauges with manual regulators that enable you to adjust and easily monitor the required vacuum or pressure level.

Supplier: VWR Collection

Dual-head, dry running diaphragm pump for a wide range of laboratory applications. It pumps, compresses and evacuates without affecting media, i.e. media remains uncontaminated. The pump includes a diaphragm with patented tension optimisation, which allows the pump to be smaller prolonging the service life of the diaphragm.

Supplier: VWR Collection

Dual-head, dry running diaphragm pump with an integrated self-drying system. There is a wide range of applications for this pump in laboratories, especially whenever clean vacuum is required and moist gases must be pumped down. Examples include operation of vacuum drying chambers (for drying or heat-treating substances and components) or steam sterilisers for sterilising instruments, vessels, filters and textiles. This pump can be used in a wide range of applications due to the pump's high resistance to aggressive media. The pump includes a PTFE coated diaphragm with patented tension optimisation, which allows the pump to be smaller, and prolongs the service life of the diaphragm. The innovative self-drying system allows condensed liquid to be blown out of the pump heads at high speed during evacuation. The vacuum in the vacuum chamber remains constant. The drying cycle can be adjusted to the requirements of the individual process using three variables. After drying, the pump reaches a better vacuum and is able to evacuate significantly faster compared with pumps without a drying system.

Supplier: VWR Collection

Single head, dry running diaphragm pump for a wide range of laboratory applications. It pumps, compresses and evacuates without affecting media, i.e., media remains uncontaminated. Includes diaphragm with patented tension optimisation, which allows the pump size to be smaller extending the service life of the diaphragm.

Supplier: KNF

Series N 022 diaphragm pumps are single-head, dry-running devices used in a wide range of laboratory applications. They transfer, compress and pump down without contamination.

Supplier: VWR Collection

The VP 220 is ideal for rotary evaporators providing the powerful vacuum needed for demanding evaporations without the use of oil pumps. VP 220 has built-in Advanced Vapour Management (AVM) which means precise control capability for the distillation of organic solvents and applications handling aggressive vapours and gases. The VP 220 is especially effective for rotary evaporation of low boiling point solvents such as acetone and ethanol and is able to rapidly strip DMF at 35 °C. The pump parts are all made of corrosion resistant materials such as PTFE and Kalrez to handle aggressive vapours, and together with vacuum adjustment, the evaporation process will be optimised. Use the vacuum adjustment to increase the vacuum until bubbles form in the evaporation flask - then lower it slightly. Reduce the vacuum for fast reaction to bumping or foaming.

Supplier: KNF

Chemically resistant, oil-free diaphragm vacuum pump featuring PTFE heads, PTFE-coated diaphragms and FFPM valves. An integrated self-drying system prevents the accumulation of condensates within the pump heads. Ideal for applications with exceedingly wet vapors.

Supplier: KNF

Single- or dual-headed, dry running diaphragm pumps for a wide variety of applications in laboratories. They transfer and evacuate without affecting the media, i.e. media remains uncontaminated. The pump includes a PTFE-coated diaphragm with patented tension optimisation, which allows the pump to be smaller and prolongs the service life of the diaphragm, it is ideal for aggressive/corrosive gases and vapors.

Supplier: KNF

This diaphragm pumps is double-head, dry-running devices used in a wide range of laboratory applications.

Supplier: KNF

These vacuum systems are especially suitable for controlling processes in a rotary evaporator. The patented, closed system arrangement enables gentle distillation and high recovery rates of solvents even with low boiling points.

Supplier: BURKLE

It is a single-head membrane vacuum pump which is widely used in research laboratories and industrial applications.

Supplier: KNF

Single or dual-head chemically resistant, dry running diaphragm pumps for a wide range of laboratory applications. They transfer and evacuate without affecting the media, i.e. media remains uncontaminated.

Supplier: VACUUBRAND

This VARIO® chemistry pumping unit optimizes vacuum conditions automatically by precisely and continuously adjusting the diaphragm pump´s motor speed. Thanks to the motor speed control the pump operates only when vacuum is needed, saving energy and reducing maintenance.

Supplier: Welch by Gardner Denver

These non-chemical-resistant diaphragm pumps characterized by a compact design, long lifespan and oil-free evacuation are designed for aqueous and standard duty applications. The diaphragm series are well known for smooth operation. They are available in one or multistage configuration with controlled (ecoflex) or uncontrolled pumping speed. Ecoflex diaphragm pumps are equipped with a state-of-the-art vacuum control which allows the pumping speed to be varied.

Supplier: Welch by Gardner Denver

These are certified pumps for the evacuation of combustible atmospheres inside or outside of highly combustible environments. They are used for operating in potentially explosive atmospheres.

Supplier: VACUUBRAND

These mechanical diaphragm pumps function without oil. They are easy to operate, use no water and generate neither wastewater nor used oil. These pumps are used for evacuating or pumping gases between containers in chemistry or physics laboratories and are extremely versatile.

Supplier: VACUUBRAND

These chemistry vacuum systems can be used in a wide range of applications for evacuating or moving gases and vapours between containers in chemistry and physics laboratories, e.g. as an alternative to water jet pumps and rotary vane pumps. Compact construction, very quiet running, long service life; diaphragm and valves are very easy to replace. Oil-free vacuum.

Supplier: VACUUBRAND

These chemistry vacuum systems can be used in a wide range of applications for evacuating or moving gases and vapours between containers in chemistry and physics laboratories, e.g. as an alternative to water jet pumps and rotary vane pumps. Compact construction, very quiet running, long service life; diaphragm and valves are very easy to replace. Oil-free vacuum.

Supplier: Welch by Gardner Denver

Pumps are constructed with PTFE heads, perfluoroelastomer valves and a PTFE coated molded diaphragm. Includes intake/exhaust hose barbs. DRYFAST® models include tunable vacuum control.

Supplier: VACUUBRAND

These chemistry vacuum systems can be used in a wide range of applications for evacuating or moving gases and vapours between containers in chemistry and physics laboratories, e.g. as an alternative to water jet pumps and rotary vane pumps. Compact construction, very quiet running, long service life, diaphragm and valves are very easy to replace. Oil-free vacuum.

Supplier: Welch by Gardner Denver

The MPC chemical duty diaphragm pumps use PTFE and other fluorinated plastics for the wetted parts to allow aggressive solvent and acid vapours to be pumped. If the pump should handle harsh chemical vapours, then the superior chemical resistant X2 version with higher grade seals and thicker coatings are the best choice. These are well known for quiet operation and running smoothness.

Supplier: VACUUBRAND

These chemistry vacuum systems can be used in a wide range of applications for evacuating or moving gases and vapours between containers in chemistry and physics laboratories, e.g. as an alternative to water jet pumps and rotary vane pumps. Compact construction, very quiet running, long service life, diaphragm and valves are very easy to replace. Oil-free vacuum.

Supplier: VACUUBRAND

The VP 2 Autovac chemistry pumping unit, with vacuum controller, meets the demands of modern rotary evaporation. The hysteresis-free vacuum control prevents boiling retardation and foaming, therefore, ensuring consistently high process safety and an exceptionally high performance, even at low vacuum. This control enables detection of vapour pressure and fully automatic adjustment of the vacuum level to the process requirements without any user programming or intervention.

Supplier: VACUUBRAND

Chemistry diaphragm pumps: Chemistry diaphragm pumps in equipment category 2 (e.g. for Zone 1) with ATEX compliance. These pumps are exceptionally well designed for the avoidance of ignition sources. They have good chemical resistance, are oil-free, have no friction surfaces and the suction chamber is hermetically sealed off from the drive unit compartment. Motor with flameproof enclosure and integrated, self contained overcurrent and overheating protection for direct 230 V/60 Hz single-phase connection. Diaphragm pump heads made of anti-static materials. Chemically resistant: Materials in contact with media; fluorinated plastics, stainless steel, FFKM. Gas ballast with separate inert gas connection. Pressure relief valves inside and at the outlet. Safety membrane technology with the option for inert gas flushing and membrane tear detection.