You searched for: Desiccators

Supplier: VWR Collection

Porcelain plates, glazed on one side. The plates contain numerous holes of 5 mm Ø, (VWRU89038-074 has 2 mm Ø) and a large centre hole.

Supplier: VWR Collection

Porcelain desiccator plates. Central hole Ø 20 mm, filter holes Ø approximately 5 mm. Suitable for use with any desiccators with corresponding diameter.

Supplier: VWR Collection

Porcelain, glazed on one side.

Supplier: VWR Collection

Borosilicate glass 3.3

Supplier: VWR Collection

Humidity Sponges™ meet FDA (Food and Drug Administration) requirements for use in direct contact with food and drugs. Desiccant (sodium calcium aluminosilicate hydrate) is non toxic and is a GRAS (Generally Recognised as Safe) material. It is ideal for storing food/pharmaceutical samples, electronics, PC boards, optics, chemicals and equipment. Outer material is made from DuPont’s Tyvek® breathable, high-density polyethylene.

Supplier: VWR Collection

Borosilicate 3.3 glass.

Supplier: VWR Collection

These acrylic desiccator cabinets can be used in refrigerators or at room temperature for dry storage of moisture-sensitive materials.

Supplier: VWR Collection

Borosilicate 3.3 glass.

Supplier: Bohlender

Desiccator cabinets, PC ESD, have a reinforced aluminium frame with panels made of antistatic polycarbonate and an easy to read electronic hygrometer. They are mainly used for temporary storage of components for electronic products.

Supplier: DWK Life Sciences

DURAN® clear borosilicate glass 3.3, vacuum desiccator with Mobilex screw thread without porcelain plate.

Supplier: Bohlender

Silica gel with colour indicator.

Supplier: Bohlender

These transparent acrylic cabinets have solid 25 mm thick walls, a circular silicone seal and a vacuum gauge (0 to 760 mm of mercury).

Supplier: Bohlender

Cabinet has a reinforced aluminium frame, lightproof panels made of black acrylic glass which prevent light incidence and protect against ultraviolet radiation. Specially designed for the storage of substances to the exclusion of light transmission and ultraviolet radiation.

Supplier: Bohlender

Desiccator cabinets, transparent acrylic, aluminium frame with panels made of acrylic glass, which are suitable for long-term storage.

Supplier: Bohlender

Transparent PPMA cabinet with reinforced aluminium frame, unit has a door with a foam rubber gasket and magnetic strip. Designed for storing or drying humidity sensitive products using silica gel. The controlled environment inside the desiccator is ideal for storing reference materials, retained samples, metallographic specimens, tobacco and DNA-samples.

Supplier: DWK Life Sciences

Clear DURAN®, borosilicate glass 3.3, choice of models with flat flange, NOVUS NS 24/29 junction, and outlet in lid with stopcock or desiccators with flat flange without junction and lid with a knob.

Supplier: Bohlender

This transparent PMMA cabinet has a reinforced aluminium frame, forward opening door with foam rubber gasket and magnetic strip. Ideal for wide products such as A3 sheets or conductor boards.

Supplier: Bohlender

Aluminium frame with panels made of acrylic glass, including four shelves made of polycarbonate, tray, hygrometer and desiccant, usable with up to 38 shelves, stackable.

Supplier: Bohlender

PC desiccator cabinet which has reinforced aluminium frame with antistatic acrylic panels and easily readable electronic hygrometer. Mainly used for temporary storage of components for electronic products.

Supplier: Bohlender

The Auto Big Star desiccator cabinet has an aluminium frame with panels made of acrylic glass, including two stainless steel shelves, hygrometer and mounted drying unit, usable with up to eight shelves.

Supplier: Bohlender

Clear polycarbonate desiccators for gas filling with single door with snap fit closing and integrated gasket ensuring easy opening and tight closure.

Supplier: Bohlender

Clear polycarbonate lockable desiccators with single door with snap fit closing and integrated gasket ensuring easy opening and tight closure. Temperature resistant from −35 to +70 °C, suitable for use under normal pressure.

Supplier: Corning

These PYREX® desiccators have a rugged 24/29 standard tapered stopcock with a tooled hose connection that serves as the vacuum inlet.

Supplier: Bohlender

Aluminium frame with 2-pane insulation (inside glass, outside acrylic glass), including four shelves made of PC, usable with up to max. 26 shelves. Integrated heating (850 W) with temperature sensor and air circulation. Electrical power connection 230 V/50 Hz is required.

Supplier: Corning

These PYREX® borosilicate glass desiccators are designed for general analytical work. Material is Borosilicate Glass Code 7740.

Supplier: DWK Life Sciences

DURAN® clear borosilicate glass 3.3, vacuum desiccator with Mobilex screw thread in the lid with stopcock. With desiccator base with flat flange, no outlet, PBT screw cap with pierced aperture GL 32.

Supplier: Bohlender

Clear, PMMA, reinforced aluminium frame with panels made of acrylic glass.

Supplier: Bohlender

Clear polycarbonate portable desiccator with convenient handle. Door with snap fit closing and integrated gasket ensuring easy opening and tight closure. Temperature resistant from −35 to +70 °C, suitable for use under normal pressure.

Supplier: Bohlender

SICCO desiccators are designed for storing and drying humidity sensitive products using silica gel. The tight fitting door protects the contents from contamination in the atmosphere.

Supplier: DWK Life Sciences

DURAN® clear borosilicate glass 3.3, lid with threaded outlet, type MOBILEX (GL 32), stopcock with PTFE spindle.