You searched for: Syringe Filters

Supplier: VWR International

Typical applications are clarification, sterile filtration, sample preparation and sterile venting.

Supplier: Avantor

These syringe filters are specifically designed for chromatography sample preparation applications and optimized to provide the most consistent results with less extractables.

Supplier: Avantor

Pall GHP Polypropylene membrane will be discontinued effective October 31st, 2019. This discontinuation affects devices including syringe filters, filter plates, centrifugal devices and membrane filter discs.

Supplier: Cytiva

Whatman™ Uniflo™ syringe filters are well suited for rapid, routine syringe filtration of small volume samples up to 100 ml in laboratory sample preparation.

Supplier: Cytiva

Ideal for filtration of gas and organic solvents. Also used for air filtration and venting.

Supplier: Cytiva

These 25mm filters are ideal for the sterilization of media used for cell cryopreservation. Constructed of nylon filter media in a polypropylene housing, they are compatible with solutions containing DMSO. Filters feature a female Luer-lock inlet connection and a male slip Luer outlet connection, and operate at a maximum temperature of 55°C (131°F). Sterilized by ethylene oxide.

Supplier: Cytiva

These syringe filters are ideal for filtration of gas and organic solvents. They can also be used for air filtration and venting.

Supplier: Cytiva

For prefiltering heavily contaminated aqueous or solvent based samples. Filters are made of 100% binder-free borosilicate glass fiber. Hydrophilic nylon membrane has excellent chemical compatibility with esters, bases, and alcohols and does not require prewetting. GHP (hydrophilic polypropylene) membrane is low protein binding. Both nylon and GHP membrane filters include a glass fiber prefilter layer, as well as being HPLC certified for low UV-absorbing extractables. The regular glass fiber membrane has very low extractables. Polypropylene housing. Female Luer-lock inlet and male slip Luer outlet.

Supplier: Cytiva

Acrodisc™ syringe filters with Supor™ membrane deliver high flow rates and low protein binding.

Supplier: Cytiva

These 13mm and 25mm filters are optimized to provide the most consistent results when analyzing ionic species using IC (ion chromatography). Certified for low conductivity detectable extractables. Also excellent for filtration of dissolution samples. Supor® (hydrophilic polyethersulfone) membrane exhibits very low drug and protein adsorption. Polypropylene housing. Effective filtration area: 3.9cm² (25mm) or 1.0cm² (13mm). Recommended sample volume: \<150mL (25mm) or \<10mL (13mm). Typical hold-up volume: 125µL (25mm) or \<10µL (13mm).

Supplier: Cytiva

These syringe filters offer a choice of filter media: hydrophobic PTFE membrane for exceptional chemical and temperature compatibility; hydrophilic nylon membrane for excellent chemical compatibility with esters, bases, and alcohols, without prewetting; GHP (hydrophilic polypropylene) membrane for low protein binding; and hydrophilic PVDF (polyvinylidine fluoride) membrane for use in aqueous and nonaggressive, solvent-based mobile phases. Polypropylene housing with female Luer-lock inlet and standard male slip Luer outlet connections. All membranes are HPLC certified for low levels of UV-absorbing extractables.

Supplier: Cytiva

For use in cell culture and other sensitive biological research.

Supplier: Cytiva

These premium syringe filters combine the benefits of a multi-layered prefiltration device with an automation-certified filter housing. The polypropylene housing has been designed to withstand high operating pressures. Some models feature a GxF borosilicate glass prefilter, which provides two to four times the throughput of standard glass fiber prefilter devices, allowing for quick and easy filtration of difficult-to-filter samples.

Supplier: Cytiva

Filters are for removal of fine particulates and microorganisms and general clarification of HPLC, organic, and biological samples. Regenerated cellulose membrane is hydrophilic and low protein-building, with low extractables and resistance to a wide range of chemicals, making membrane ideal for HPLC work. Housing is solvent-resistant polypropylene with standard Luer-lock connections. Mini-Tip outlet is available for filtration into very small bottle samples. Filters are tested and certified for the absence of UV-absorbing substances at wavelengths of 214 and 254 nm with water, methanol, and acetonitrile.

Supplier: Cytiva

These 25mm filters are ideal for scale up. Filters feature a polypropylene housing and a choice of four membrane types to assure compatibility with a wide range of fluids. Choose Supor® (hydrophilic polyethersulfone), Ultipor® (amphoteric Nylon N66), Fluorodyne® II (hydrophilic polyvinylidene fluoride), or Posidyne® (positively-charged Nylon N66) membrane. Filters are tested for bacterial retention to assure sterile filtrate and can be integrity tested by the water bubble point method. There is no need to change membrane materials during transition to pilot or full-scale production. Filters have a female Luer-lock inlet and a male slip Luer outlet. Sterilized by gamma irradiation.

Supplier: Thermo Scientific

For use with nonaqueous-based and aggressive samples. Resistant to all solvents, acids, and bases. Very low in extractables and low nonspecific binding. For use with aqueous samples, pre-wet the membrane with 3% MEOH and water, rinse with DI, and filter sample. The 4mm filters can be used for volumes less than 2mL. The 0.2µm pore size filter can be used for “cold” sterilization.

Supplier: Thermo Scientific

Adding a syringe filtration step prior to injection not only helps to ensure more consistent and reliable results; it also helps protect delicate instruments and prolongs column life. Available in sizes and membrane types to meet any application need, Thermo Scientific™ Target2™ Syringe Filters provide cleaner sample extracts by removing interfering materials and fine particles down to the rated pore size. Target2 Nylon Syringe Filters are a good choice for most general laboratory filtration, as well as filtration of most HPLC samples.

Supplier: Thermo Scientific

Cellulose acetate membrane for biological or protein-based samples.

Supplier: Thermo Scientific

PVDF (polyvinylidene difluoride) is a hydrophilic, solvent-resistant membrane with low levels of UV absorbing extractables. Housing manufactured from medical grade, virgin polypropylene. Low nonspecific binding. Use for HPLC sample filtration and general biological filtration. PVDF is also a low protein binding membrane. Enhanced female Luer-lock inlet; male Luer slip outlet. The 4mm filters can be used for volumes less than 2mL. The 0.2µm pore size filter can be used for “cold” sterilization.

Supplier: DWK LIFE SCIENCES S. DE R.L. DE MX

MicroLiter's syringe filters are manufactured with the most advanced construction methods and design features available today.

Supplier: Cytiva

Cytiva's Whatman GD/X sterile syringe filter is designed to support filtration of viscous, hard-to-filter samples with high solids content.

Supplier: Cytiva

Whatman Anotop sterile syringe filters from Cytiva contain an inorganic Anopore membrane. The low protein binding exhibited by this sterile membrane filter make it well suited for biological filtration.

Supplier: Cytiva

Whatman Puradisc micron syringe filters from Cytiva's offer a versatile solution for analytical sample preparation needs. They are a variety of options available to suit all labs needs, and are well-suited for routine syringe filtration of samples up to 100 ml for a range of applications, including high performance liquid chromatography (HPLC) and capillary electrophoresis (CE).

Supplier: Cytiva

Puradisc™ syringe filters combine premium quality and economy. They are ideal for the quick, efficient filtration of samples up to 100 mL volume. Puradisc filters are produced from pigment-free polypropylene or polycarbonate with standard inlet (female luer lock) and outlet (male luer) connections (unless otherwise stated). Options include a sterile, medical-grade blister pack for critical applications and a special tube tip outlet that allows the sample to be accurately dispensed into a micro-vial, eliminating air lock.

Supplier: Cytiva

Whatman Puradisc H-PTFE syringe filter contains a hydrophilic membrane that is chemically stable and inert. The H-PTFE membrane exhibits low protein binding and can be used for both aqueous and aggressive organic solvents.

Supplier: Thermo Scientific

Adding a syringe filtration step prior to injection not only helps to ensure more consistent and reliable results; it also helps protect delicate instruments and prolongs column life.

Supplier: Cytiva

For filtration of tissue culture media, cleanup of difficult samples for analysis, filtration of colloidal material, and removal of mycoplasma.

Supplier: Cytiva

Whatman Puradisc syringe filters from Cytiva's business combine premium quality with economic efficiency. They are well suited for rapid, routine syringe filtration of samples up to 100 ml.

Supplier: Cytiva

Whatman Puradisc syringe filters from Cytiva's business combine premium quality with economic efficiency. They are well suited for rapid, routine syringe filtration of samples up to 100 ml.

Supplier: Cytiva

Syringe filters made of PC, suitable for filtration of aqueous solutions up to 100 ml. Hydrophilic cellulose acetate, with extremely low protein binding. Hydrophilic cellulose nitrate, versatile membranes for the filtration of aqueous solutions.