Supplier: VWR Collection

VCP 80 and VCP 130 can be used as vacuum and pressure pumps, and set a standard for efficient vacuum use. Use these pumps as an affordable vacuuming application where corrosion resistance is not required. These pumps can be used for vacuum filtration of aqueous solutions, or aqueous fumes including buffers, but are not recommended for pumping acidic, basic or organic fumes. These VWR® Collection vacuum/pressure pumps are designed for continuous unattended operation, and have two dial gauges with manual regulators that enable you to adjust and easily monitor the required vacuum or pressure level.

Supplier: VWR Collection

Dual-head, dry running diaphragm pump with an integrated self-drying system. There is a wide range of applications for this pump in laboratories, especially whenever clean vacuum is required and moist gases must be pumped down. Examples include operation of vacuum drying chambers (for drying or heat-treating substances and components) or steam sterilisers for sterilising instruments, vessels, filters and textiles. This pump can be used in a wide range of applications due to the pump's high resistance to aggressive media. The pump includes a PTFE coated diaphragm with patented tension optimisation, which allows the pump to be smaller, and prolongs the service life of the diaphragm. The innovative self-drying system allows condensed liquid to be blown out of the pump heads at high speed during evacuation. The vacuum in the vacuum chamber remains constant. The drying cycle can be adjusted to the requirements of the individual process using three variables. After drying, the pump reaches a better vacuum and is able to evacuate significantly faster compared with pumps without a drying system.

Supplier: VWR Collection

Single head, dry running diaphragm pump for a wide range of laboratory applications. It pumps, compresses and evacuates without affecting media, i.e., media remains uncontaminated. Includes diaphragm with patented tension optimisation, which allows the pump size to be smaller extending the service life of the diaphragm.

Supplier: KNF

Series N 022 diaphragm pumps are single-head, dry-running devices used in a wide range of laboratory applications. They transfer, compress and pump down without contamination.

Supplier: VWR Collection

Dual-head, dry running diaphragm pump for a wide range of laboratory applications. It pumps, compresses and evacuates without affecting media, i.e. media remains uncontaminated. The pump includes a diaphragm with patented tension optimisation, which allows the pump to be smaller prolonging the service life of the diaphragm.

Supplier: KNF

The robust diaphragm vacuum pump N920G is extremely quiet.

Supplier: Merck

Millivac™ Maxi vacuum pumps are compact, maintenance-free pumps that provide a consistent source of vacuum for filtration and other laborabory applications. A patented diaphragm design has reduced the footprint of the pumps compared to conventional models.

Supplier: VWR Collection

The VP 220 is ideal for rotary evaporators providing the powerful vacuum needed for demanding evaporations without the use of oil pumps. VP 220 has built-in Advanced Vapour Management (AVM) which means precise control capability for the distillation of organic solvents and applications handling aggressive vapours and gases. The VP 220 is especially effective for rotary evaporation of low boiling point solvents such as acetone and ethanol and is able to rapidly strip DMF at 35 °C. The pump parts are all made of corrosion resistant materials such as PTFE and Kalrez to handle aggressive vapours, and together with vacuum adjustment, the evaporation process will be optimised. Use the vacuum adjustment to increase the vacuum until bubbles form in the evaporation flask - then lower it slightly. Reduce the vacuum for fast reaction to bumping or foaming.

Supplier: Merck

Millivac™ Mini vacuum pumps are compact, maintenance-free pumps that provide a consistent source of vacuum for filtration and other laborabory applications. A patented diaphragm design has reduced the footprint of the pumps compared to conventional models.

Supplier: KNF

Chemically resistant, oil-free diaphragm vacuum pump featuring PTFE heads, PTFE-coated diaphragms and FFPM valves. An integrated self-drying system prevents the accumulation of condensates within the pump heads. Ideal for applications with exceedingly wet vapors.

Supplier: KNF

Single- or dual-headed, dry running diaphragm pumps for a wide variety of applications in laboratories. They transfer and evacuate without affecting the media, i.e. media remains uncontaminated. The pump includes a PTFE-coated diaphragm with patented tension optimisation, which allows the pump to be smaller and prolongs the service life of the diaphragm, it is ideal for aggressive/corrosive gases and vapors.

Supplier: KNF

These vacuum systems are especially suitable for controlling processes in a rotary evaporator. The patented, closed system arrangement enables gentle distillation and high recovery rates of solvents even with low boiling points.

Supplier: KNF

Single- or dual-head chemically resistant, dry running diaphragm pumps for a wide range of laboratory applications. They transfer and evacuate without affecting the media, i.e. media remains uncontaminated.

Supplier: BURKLE

It is a single-head membrane vacuum pump which is widely used in research laboratories and industrial applications.

Supplier: KNF

This diaphragm pumps is double-head, dry-running devices used in a wide range of laboratory applications.

Supplier: KNF

Vacuum Pump System SC 920 G is speed regulated.
Application: Rotary evaporation, distillation.

Supplier: KNF

The modular SC systems are equipped with a chemically resistant diaphragm pump. The vacuum systems can be used in a wide range of laboratory tasks wherever a clean and constant vacuum is needed. There is a selection of vacuum pumps with different capacities and different modular system components to match any laboratory use.

Supplier: KNF

Single or dual-head chemically resistant, dry running diaphragm pumps for a wide range of laboratory applications. They transfer and evacuate without affecting the media, i.e. media remains uncontaminated.

Supplier: Welch by Gardner Denver

The perfect partner for your rotovap. Faster, better quality distillation and solvent concentration.

Supplier: VACUUBRAND

This VARIO® chemistry pumping unit optimizes vacuum conditions automatically by precisely and continuously adjusting the diaphragm pump´s motor speed. Thanks to the motor speed control the pump operates only when vacuum is needed, saving energy and reducing maintenance.

Supplier: VACUUBRAND

The three-stage VARIO-SP® diaphragm pumps, with its variable speed drive system, attains significantly higher pumping speed and a better ultimate vacuum than the corresponding fixed speed pump. The brushless motor (maintenance-free) enables easy integration of the pump into other equipment, and operation independent of line voltage. The motor speed is either fixed or can be adjusted externally via electronic control signals for adaptation to process requirements.

Supplier: Welch by Gardner Denver

These non-chemical-resistant diaphragm pumps characterized by a compact design, long lifespan and oil-free evacuation are designed for aqueous and standard duty applications. The diaphragm series are well known for smooth operation. They are available in one or multistage configuration with controlled (ecoflex) or uncontrolled pumping speed. Ecoflex diaphragm pumps are equipped with a state-of-the-art vacuum control which allows the pumping speed to be varied.

Supplier: VACUUBRAND

Models PC 101 NT and PC 201 NT.

Supplier: Welch by Gardner Denver

CDK turbomolecular pumping systems are completely oil-free. It incorporate an oil-free SST turbomolecular pump using dry-running, solid-lubricated ceramic bearings. The backing pump is an oil-free diaphragm vacuum pump.

Supplier: VACUUBRAND

The VACUU·SELECT controller simplifies your work and allows VARIO select chemistry diaphragm pumps to deliver unparalleled precision. The pumps run whisper quiet and respond to demand in real time by matching pumping speed to process conditions. The intuitive VACUU·SELECT controller includes predefined applications for all common vacuum processes.

Supplier: Welch by Gardner Denver

All standard WOB-L piston pumps are recommended for pumping vapors of aqueous solutions including buffers but not for acidic, basic or organic vapours or gases.

Supplier: VACUUBRAND

Vacuum filtration is one of the most common applications used for sample preparation in chemistry, microbiology, wastewater control and other analytical processes. VP 100 and VP 100 C diaphragm pumps offer a compact, high performance and easy to use solution which is perfect for both single and multiple filtrations.

Supplier: VACUUBRAND

These mechanical diaphragm pumps function without oil. They are easy to operate, use no water and generate neither wastewater nor used oil. These pumps are used for evacuating or pumping gases between containers in chemistry or physics laboratories and are extremely versatile.

Supplier: VACUUBRAND

This VARIO® chemistry pumping unit provides vacuum control by precise and continuous adaptation of the diaphragm pump's motor speed. The on-demand motor speed control extends diaphragm lifetime considerably.

Supplier: Welch by Gardner Denver

Pumps are constructed with PTFE heads, perfluoroelastomer valves and a PTFE coated molded diaphragm. Includes intake/exhaust hose barbs. DRYFAST® models include tunable vacuum control.