You searched for: Glass Fibre Filters

Supplier: Merck

ORBO™ 80 is a glass fiber filter coated with 1-(2-pyridyl)piperazine.

Supplier: VWR Collection

Binder-free glass fibre filters feature fast flow rates, high loading capacity, wide thermal tolerance and excellent precipitate retention.

Supplier: Cytiva (Formerly Pall Lab)

Superior grade glass fibre filters for a variety of air sampling methods. Used in a variety of sample clean-up, prefiltration and analytical testing applications.

Supplier: Merck

Millipore fibrous disc filters are available in a wide range of flow rates and throughput capacities. Our glass fibre filters are available with or without binder resins and can be sterilised by EO, gamma, or autoclave (121 °C at 1 bar).

Supplier: Sartorius

These 100% high-purity quartz microfibre filters are free of glass fibres and binding agents. They are especially suited for emission monitoring at temperature of up to 900 °C and wherever filters of the highest purity are needed.

Supplier: Sartorius

Quartz microfiber filters are free of glass fibers and binding agents.

Supplier: Whatman products (Cytiva)

These microfiber filters made from borosilicate glass are suitable for water and wastewater analysis, with extremely fine particle retention and added strength.

Supplier: Whatman products (Cytiva)

Whatman™ QM-H is a pure quartz fibre filter for use in testing acidic gases, stacks, flues and aerosols. It has low heavy metal content so it is well suited for heavy metals analysis.

Supplier: Cytiva (Formerly Pall Lab)

Low extractable, binder-free borosilicate glass fibre filters. Suitable for use of the EPA 1311 Toxicity Characteristics Leaching Procedure and for prefiltration of dirty HPLC samples.

Supplier: Whatman products (Cytiva)

These borosilicate glass papers are designed for use when drying samples during moisture assessment.

Supplier: Whatman products (Cytiva)

These borosilicate glass filters are particularly useful for liquid clarification and liquid scintillation counting.

Supplier: Whatman products (Cytiva)

HGF61 glass fibre tape provides strength, efficiency, reliability and consistency of data quality in continuous air monitoring.

Supplier: Whatman products (Cytiva)

These are glass microfibre filters for general filtration applications.

Supplier: Whatman products (Cytiva)

Grade GF/A card-mounted filters are used in static sample and personal air sampler applications. These aerosol sampling and particulate monitoring filters provide high flow rates and minimal sample interference.

Supplier: Cytiva (Formerly Pall Lab)

Versatile filters uniquely suited for a broad range of air monitoring applications.

Supplier: Whatman products (Cytiva)

These glass microfibre filters made from borosilicate glass are strengthened with an organic binder to provide high mechanical stability.

Supplier: Merck

The filters without binder resin retain their structural integrity without weight loss when heated up to 500 °C and can therefore be used in gravimetric analysis as well as for the filtration of hot gases.

Supplier: Whatman products (Cytiva)

These borosilicate glass filters are fine membrane filters that can also function as a prefilter when used with GF/B.

Supplier: Whatman products (Cytiva)

These borosilicate glass filters are widely used as total suspended solids filters for applications testing both potable water and waste water.

Supplier: Whatman products (Cytiva)

Whatman Grade GF 9 glass microfiber filters from Cytiva's business are strengthened with an inorganic binder for environmental analysis of coarse, heavy samples.

Supplier: Merck

Millipore filters with binder resin have superior wet strength and are excellent for qualitative analysis and prefiltration, especially for heavily contaminated liquids. They are also widely used for clarification of aqueous solutions.

Supplier: Merck

Made of very pure quartz fibers with no glass fibers or binders. This makes these filters well suited for measuring heavy metal concentrations and small amounts of particles (such as the USEPA PM 10 ambient air monitoring method). The filters also exhibit good weight and form stability.

Supplier: Whatman products (Cytiva)

Cytiva's Whatman TCLP test filters are acid-treated with low metal content. They support TCLP testing by providing accurate information about TCLP limits to ensure the best possible disposal plan can be put into action.

Supplier: Whatman products (Cytiva)

These borosilicate glass filters are specified for water pollution monitoring, cell harvesting, liquid scintillation counting and air pollution monitoring. They are often used in total suspended solids analysis.

Supplier: Whatman products (Cytiva)

These EPM 2000 air filters are used in high volume PM-10 sampling equipment. Manufactured from 100% pure borosilicate glass, they enable detailed chemical analysis of trace pollutants with minimal interference.

Supplier: Whatman products (Cytiva)

These high purity QM-B quartz fibre filters are designed for use in specific air monitoring applications.

Supplier: Whatman products (Cytiva)

GMF 150 prefilters are multilayer graded density filters for rapid and efficient filtration of samples with high solids content. They are designed with a course top layer (10 µm) and meshed with a finer layer of 1 or 2 µm. Manufactured from 100% borosilicate glass microfibre, the filter is binder free. It is an excellent prefilter for higher particulate loading capacity with faster flow rates.

Supplier: Whatman products (Cytiva)

These borosilicate glass filters are suitable for water quality parameter measurement and air filtration applications. They can be used for high efficiency, general purpose laboratory filtration, including water pollution monitoring of effluents, for filtration of water, foodstuff analyses, protein filtration, and radioimmunoassay of weak β emitters.

Supplier: Whatman products (Cytiva)

These borosilicate glass filters are widely used as total suspended solids filters for applications testing both potable water and waste water. GF/C can also function as a filter for liquid scintillation counting, cell harvesting, industrial waste analysis and binding assays that require high loading capacity.

Supplier: Whatman products (Cytiva)

These glass microfibre filters made from borosilicate glass are used for filtration of coarse particles. They offer faster filtration and a higher air flow rate compared to the similar grade GF 9 filters.