Masterflex® L/S® Drive with Easy-Load® II High-Performance Pump Head, 600 rpm

# de catalogue MFLX77712-37

Fournisseur: Avantor Fluid Handling

Masterflex® L/S® Drive with Easy-Load® II High-Performance Pump Head, 600 rpm

# de catalogue MFLX77712-37

Fournisseur: Avantor Fluid Handling

Spécifications

Voir toutes les configurations de produits

Model:
Masterflex L/S Drive with Easy-Load II Pump Head
Masterflex L/S Drive with Easy-Load II Pump Head

Channels:
1
1

No. of rollers:
4; stainless steel
4; stainless steel

Housing material:
Polyphenylene Sulfide (PPS)
Polyphenylene Sulfide (PPS)

Flow rate:
1.7 - 4.8 ml/min. per channel
0.06 - 3.8 ml/min. per channel

Input:
4 - 20 mA, 0 - 10 V, start/stop and direction via contact closure (remote inputs)
4 - 20 mA, 0 - 10 V, start/stop and direction via contact closure (remote inputs)

Warranty:
2 years
2 years

En cours de visualisation

Spécifications

A propos de cet article

Don't lose control of your metering applications—digital display gives you repeatable control.

Flow rate 0.06 to 3400 ml/min—flow rate depends on drive rpm, pump head, and tubing size
Three digit LED display shows motor rpm — confirm speed setting at a glance
Reversible motor—purge tubing before or after pumping; pump fluid in either direction
LED indicators confirm motor direction
Powerful motors let you stack 2 or 4 pump heads for increased flow rates and for multichannel applications
Separate speed and power (on/off) control — maintain speed setting while turning pump on/off
Stackable, splash-resistant ABS plastic housing; IP33 rated
Remote control capabilities via a DB9 female connector on back of drive
Speed control input: 4 to 20 mA or 0 to 10 VDC
Pump direction (CW/CCW) via open collector or contact closure
Start/stop via open collector or contact closure
Membrane keypad for easy up-front control of speed, direction, and start/stop
Automatic tubing retention
Fixed occlusion

These accurate analog console drives have powerful motors, speed display, and ±0.25% speed control for precise flow regulation—ideal for metering applications. Remote speed control requires DB9 male connector 07595-45 or cable assembly 07595-47. Use remote connector for control of start/stop via contact closure or open collector (5 V TTL); control start/stop via footswitch 77595-35 or handheld remote 07528-80. This system includes the drive and pump head.

BodyTextAccessories: Drive 07528-10 and pump head 77200-60.

Flow rate:
1.7 - 4.8 ml/min. per channel
Description:
Masterflex L/S Drive with easy-load II pump head for high-performance precision tubing; 600 rpm, stainless steel rotor material (no open-head sensor)
Model:
Masterflex L/S Drive with Easy-Load II Pump Head
Power:
90 - 260 VAC, 50/60 Hz
Channels:
1
Input:
4 - 20 mA, 0 - 10 V, start/stop and direction via contact closure (remote inputs)
No. of rollers:
4; stainless steel
Warranty:
2 years
Housing material:
Polyphenylene Sulfide (PPS)
Cat. no.:
MFLX77712-37
Tubing Size:
L/S® 15, L/S 24, L/S 35, L/S 36
rpm:
6 - 600
Plug Type:
US