You searched for: Multi-Element Standards

Supplier: SPEX CERTIPREP LLC

USP Standard.

Supplier: SPEX CERTIPREP LLC

Claritas PPT® Multi-Element Standards for ICP-MS.

Supplier: SPEX CERTIPREP LLC

ICH Standard

Supplier: SPEX CERTIPREP LLC

Claritas PPT® Multi-Element Standards for ICP-MS.

Supplier: SPEX CERTIPREP LLC

Claritas PPT® multi-element standards for ICP-MS

Supplier: SPEX CERTIPREP LLC

Claritas PPT® Multi-Element Standards for ICP-MS.

Supplier: SPEX CERTIPREP LLC

Instrument check (Lab Performance) standards. Assurance® mixed multi-element standards for AA & ICP.

Supplier: SPEX CERTIPREP LLC

USP Standard.

Supplier: SPEX CERTIPREP LLC

USP Standard.

Supplier: Thermo Scientific Chemicals

MDL No.: MFCD03792139

Supplier: SPEX CERTIPREP LLC

USP Standard.

Supplier: SPEX CERTIPREP LLC

CLP Standards for ICP & ICP-MS

Supplier: SPEX CERTIPREP LLC

USP Standard.

Supplier: SPEX CERTIPREP LLC

USP Standard.

Supplier: SPEX CERTIPREP LLC

CLP Standards for ICP & ICP-MS

Supplier: SPEX CERTIPREP LLC

USP Standard.

Supplier: SPEX CERTIPREP LLC

CLP interference standards for ICP & ICP-MS.

Supplier: SPEX CERTIPREP LLC

USP Standard.

Supplier: SPEX CERTIPREP LLC

USP Standard.

Supplier: SPEX CERTIPREP LLC

Claritas PPT® Multi-Element Standards for ICP-MS. Tuning solutions are for ICP-MS instrumentation tuning and mass calibration prior to analysis.

Supplier: SPEX CERTIPREP LLC

CLP Standards for ICP & ICP-MS

Supplier: SPEX CERTIPREP LLC

Claritas PPT® Multi-Element Standards for ICP-MS. Tuning solutions are for ICP-MS instrumentation tuning and mass calibration prior to analysis.

Supplier: SPEX CERTIPREP LLC

Assurance® Grade, set of 38 single-element standards

Supplier: SPEX CERTIPREP LLC

Claritas PPT® Multi-Element Standards for ICP-MS. Tuning solutions are for ICP-MS instrumentation tuning and mass calibration prior to analysis.

Supplier: SPEX CERTIPREP LLC

CLP interferents standards for ICP & ICP-MS

Supplier: SPEX CERTIPREP LLC

CLP Standards for ICP & ICP-MS

Supplier: SPEX CERTIPREP LLC

CLP Standards for ICP & ICP-MS
Our Contract Laboratory Program (CLP) standards allow you to Calibrate with Confidence®. The standards are to be used in conjunction with the Statement of Work for Inorganic Analysis; Multi-Media/Multi-Concentration Document Number ILM 05.3/ISM 01.2.

The final ICP check, performed in our own laboratories, is your stamp of assurance. We calibrate our instruments with traceable reference materials and show you the actual found value of the solution you receive, not just an ideal, calculated number as so many other standards manufacturers do. The combination of elements, concentrations and matrices listed have been diagnosed by SPEX CertiPrep for convenience of use and stability.

US EPA SOW ILM 05.3/ISM 01.2 gives specific procedures for the methods of analysis, target elements, and concentrationlevels. Standards are specified not only by the elements present and their relative concentrations, but also the order and frequency of running standards, blanks and samples. Details of these specifications may be found in the US EPA SOW ILM 05.3/ISM 01.2 in the following sections:

• Exhibit C, Inorganic Target Analyte List (TAL)
• Exhibit D, Analytical Methods
• Exhibit E, QA/QC Requirements

CLP ISM 01.2 Standards for ICP-MS
For ISM 01.2, at least one of your calibration standards must be at the Contract Required Detection Limit (CRDL). This standard, when diluted, can be used as a calibration standard to fulfill this requirement.

Supplier: SPEX CERTIPREP LLC

CLP Standards for ICP & ICP-MS
Our Contract Laboratory Program (CLP) standards allow you to Calibrate with Confidence®. The standards are to be used in conjunction with the Statement of Work for Inorganic Analysis; Multi-Media/Multi-Concentration Document Number ILM 05.3/ISM 01.2.

The final ICP check, performed in our own laboratories, is your stamp of assurance. We calibrate our instruments with traceable reference materials and show you the actual found value of the solution you receive, not just an ideal, calculated number as so many other standards manufacturers do. The combination of elements, concentrations and matrices listed have been diagnosed by SPEX CertiPrep for convenience of use and stability.

US EPA SOW ILM 05.3/ISM 01.2 gives specific procedures for the methods of analysis, target elements, and concentrationlevels. Standards are specified not only by the elements present and their relative concentrations, but also the order and frequency of running standards, blanks and samples. Details of these specifications may be found in the US EPA SOW ILM 05.3/ISM 01.2 in the following sections:

• Exhibit C, Inorganic Target Analyte List (TAL)
• Exhibit D, Analytical Methods
• Exhibit E, QA/QC Requirements

CLP ILM 02.0 Standards for ICP
Our spike standard, SPIKE-1, provides all of the analytes required for the ICP-AES and the AA spike. Add 1 ml of SPIKE-1 to aqueous samples and 2 ml of SPIKE-1 to solid samples prior to digestion.

Supplier: SPEX CERTIPREP LLC

CLP Standards for ICP & ICP-MS
Our Contract Laboratory Program (CLP) standards allow you to Calibrate with Confidence®. The standards are to be used in conjunction with the Statement of Work for Inorganic Analysis; Multi-Media/Multi-Concentration Document Number ILM 05.3/ISM 01.2.

The final ICP check, performed in our own laboratories, is your stamp of assurance. We calibrate our instruments with traceable reference materials and show you the actual found value of the solution you receive, not just an ideal, calculated number as so many other standards manufacturers do. The combination of elements, concentrations and matrices listed have been diagnosed by SPEX CertiPrep for convenience of use and stability.

US EPA SOW ILM 05.3/ISM 01.2 gives specific procedures for the methods of analysis, target elements, and concentrationlevels. Standards are specified not only by the elements present and their relative concentrations, but also the order and frequency of running standards, blanks and samples. Details of these specifications may be found in the US EPA SOW ILM 05.3/ISM 01.2 in the following sections:

• Exhibit C, Inorganic Target Analyte List (TAL)
• Exhibit D, Analytical Methods
• Exhibit E, QA/QC Requirements

CLP ISM 01.2 and ILM 05.2 & 05.3 Standards for ICP
Our spike standard, SPIKE-4, provides all of the analytes required for the IC, ICP-AES and the AA spike.

Supplier: SPEX CERTIPREP LLC

ICH Standard