Methanol ≥99.9%, BAKER ANALYZED ULTRA LC/MS™ for LC-MS, tested for UHPLC, J.T.Baker®

Supplier: AVANTOR PERFORMANCE MATERIAL LLC

MOC: Non-Regulated

Certificates

Methanol ≥99.9%, BAKER ANALYZED ULTRA LC/MS™ for LC-MS, tested for UHPLC, J.T.Baker®

Methanol ≥99.9%, BAKER ANALYZED ULTRA LC/MS™ for LC-MS, tested for UHPLC, J.T.Baker®

Supplier: AVANTOR PERFORMANCE MATERIAL LLC

MOC: Non-Regulated

Certificates

About this item

Synonyms: Hydroxy methane,Carbinol,Wood alcohol

Formula:CH₃OH

MW:32.04 g/mol

Boiling Pt:64.6 °C (1013 hPa)

Melting Pt:–98 °C

Density:0.7918 g/cm³ (20 °C)

Flash Pt:11 °C (closed cup)

MDL Number:MFCD00004595

CAS Number:67-56-1

ADR:3,II

Merck Index:13,05984

:Length:

:Width:

:Height:

:Ø

:Thickness:

:99,9

:Management of Change (MOC) category = N

:Boiling Pt:

:Boiling Pt: 64.6 °C (1013 hPa)

:Melting Pt:

:Melting Pt: -98 °C|Melting Pt: –98 °C

:Flash Pt:

:Flash Pt: 11 °C (closed cup)

:M.W. 32.04 g/mol

Storage Temperature:Ambient

EINECS:200-659-6

UN:1230

REACH:01-2119433307-44

:II

:11 °C

:GHS02

:GHS06

:GHS08

:M.O.C. Category N

Restricted Products: To process your orders without delay, please provide the required business documentation to purchase this product.

To order chemicals, medical devices, or other restricted products please provide ID that includes your business name & shipping address via email [email protected] or fax 484.881.5997 referencing your VWR account number. Acceptable forms of ID are:

• State issued document with your organization's Federal Tax ID Number
• State issued document with your organization's Resale Tax ID Number
• City or County issued Business License
• State Department of Health Services License
• Any other ID issued by the State that includes the business name & address

* ATTN: California Customers may require additional documentation as part of the CA Health & Safety Code. Products that fall under this regulation will be placed on a mandatory 21-day hold after documentation is received. VWR will not lift restrictions for residential shipping addresses.

Specification Test Results

For Laboratory,Research,or Manufacturing Use:
Appearance:
Passes Test
Gradient Elution Test (a.u.) - 254 nm:
≤0.01
Fluorescence Trace Impurities, measured as Quinine Base - at 450 nm Emission:
≤0.3 ppb
Fluorescence Trace Impurities, measured as Quinine Base - at Emission Maximum for Impurities:
≤1.0 ppb
Assay (CH₃OH):
≥99.9 %
Color (APHA):
≤10
Residue after Evaporation:
≤1.0 ppm
Water (H₂O):
≤500 ppm
LC/MS Suitability - Largest Response on ESI- Positive Mode (as Reserpine):
≤25.0 ppb
LC/MS Suitability - Largest Response on ESI- Negative Mode (as 4-Nitrophenol):
≤25.0 ppb
Trace Impurities - Aluminum (Al):
≤10.0 ppb
Trace Impurities - Calcium (Ca):
≤20 ppb
Trace Impurities - Chromium (Cr):
≤5.0 ppb
Trace Impurities - Cobalt (Co):
≤5.0 ppb
Trace Impurities - Copper (Cu):
≤5.0 ppb
Trace Impurities - Iron (Fe):
≤5.0 ppb
Trace Impurities - Lead (Pb):
≤5.0 ppb
Trace Impurities - Lithium (Li):
≤10.0 ppb
Trace Impurities - Magnesium (Mg):
≤10.0 ppb
Trace Impurities - Manganese (Mn):
≤5.0 ppb
Trace Impurities - Nickel (Ni):
≤5.0 ppb
Trace Impurities - Potassium (K):
≤10.0 ppb
Trace Impurities - Sodium (Na):
≤50.0 ppb
Trace Impurities - Tin (Sn):
≤5.0 ppb
Trace Impurities - Zinc (Zn):
≤10.0 ppb
Filtered through a 0.1 micron filter.:
Methanol ≥99.9%, BAKER ANALYZED ULTRA LC/MS™ for LC-MS, tested for UHPLC, J.T.Baker®: