You searched for: Cleanroom Wipes

Supplier: Contec

Polywipe Extra Wipes are unlaundered heavyweight polyester knit wipes with knife-cut edges that can be used in less critical applications.

Supplier: Contec

Polynit Wipes are made of 100% knitted textured polyester with knife cut edges for a very soft wipe. The soft edge is ideal for use on surfaces which are vulnerable to scratching.

Supplier: CONTEC, INC. MX

Amplitude™ Sigma™ Wipes are a hydroentangled blend of 55% cellulose and 45% polyester. They are highly sorbent, offering excellent durability and good cleanliness.

Supplier: Contec

Polyester wipes are chemically resistant and exceptionally low in particles and fibers. An interlock knit creates a durable fabric, the addition of a periodic additional stitch of a no-run interlock knit prevents the fabric unravelling creating an even more durable fabric with strong edges.

Supplier: Contec

Anticon® Gold StandardWeight™ wipes are made from 100% continuous filament polyester with a double-knit, no-run, interlock construction. The proprietary sealed edges reduce the amount of fibers released from the wipe.

Supplier: Contec

PROSAT® Polynit Heatseal Wipes are manufactured from 100% knitted textured polyester with laser-cut sealed edges for very low levels of particles and fibers. Polyester wipes are chemically resistant and exceptionally low in particles and fibers. An interlock knit creates a durable fabric, the addition of a periodic additional stitch of a no-run interlock knit prevents the fabric unraveling creating an even more durable fabric with strong edges.

Supplier: Contec

These PROSAT® wipes are manufactured from a lightweight hydroentangled cellulose/polyester and saturated with a solution of 70% USP grade IPA and 30% deionized water. A cost effective wipe ideal for transfer disinfection and general cleaning, PROSAT® Theta™ wipes offer a soft and durable wipe providing consistant solvent application.

Supplier: Contec

Anticon® White Magic™ Wipes are made from 100% continuous filament polyester with an interlock knit construction. This wipe exhibits low particle and fiber counts and provides ultra-clean wiping for critical applications.

Supplier: CONTEC, INC. MX

Quiltec® I Wipes offer the highest sorptive capacity of any sealed edge wipe available. They are manufactured using two layers of knitted polyester fabric that are laminated together to form a stronger, more adsorbent wipe. Additional fluid is captured within the quilted pockets between the fabric layers, increasing the sorbent capacity. Quiltec® I have more than twice the adsorbent capacity of a single-layer wipe.

Supplier: ECOLAB LIFE SCIENCES

Klerwipe™ 70/30 IPA mop wipes are ready-to-use mop wipes for cleaning and residue removal on large surfaces. Sterile non-woven, low particulate wipes impregnated with 70% v/v Isopropyl alcohol blended with Water for Injection.

Supplier: Contec

Anticon® Gold Sorb™ is a unique wipe which combines the performance of a microfiber yarn with that of a polyester yarn to create a wipe with superior wiping and sorptive characteristics.

Supplier: ECOLAB LIFE SCIENCES

Klerwipe™ 70/30 IPA are sterile, knitted 100% polyester wipes impregnated with 0.2 micronfiltered IPA blended with deionized water.

Supplier: Contec

PROSAT® PS-Si Delta™ Wipes feature 100% nonwoven polyester presaturated with a blend of 10% isopropanol and 90% DI water. Designed for the semiconductor industry, the PROSAT® PS-Si Delta™ Wipes are the cleanest nonwoven wipe available. The durable wipe is made from 100% nonwoven polyester fibers, hydroentagled into an extremely soft, clean, and strong fabric which is very low in both particles and extractables.

Supplier: ECOLAB LIFE SCIENCES

Klerwipe™ 70/30 IPA (polyester/cellulose) pouch wipes are sterile low particulate, non-woven polyester/cellulose wipes impregnated with 70% v/v Isopropyl alcohol blended with Water for Injection (WFI).

Supplier: Micronova

Presaturated wiper provides lubricant in controlled applications.

Supplier: Contec

PROSAT® sterile polypropylene low endotoxin wipes are presaturated with 70% USP grade isopropanol and 30% deionized water. The meltblown polypropylene wipes provide a consistent release of solvent to thoroughly remove surface contaminants in critical environments.

Supplier: Contec

Microfiber wipes presaturated with 70% IPA and 30% DI water.

Supplier: Contec

MicroSilk™ II Wipes are made with fabric densely knitted by continuous microdenier filament.

Supplier: CONTEC, INC. MX

Amplitude™ Epsilon™ Wipes are made of a special grade blue cellulose and polyester hydroentangled to form a wipe with improved cleanliness and excellent sorbency.

Supplier: Contec

These PROSAT® sterile wipes are manufactured from hydroentangled cellulose/polyester and saturated with a solution of 70% USP grade isopropanol and 30% deionized water. A cost effective wipe ideal for transfer disinfection and general surface cleaning, PROSAT® Sterile Sigma™ wipes offer a soft and durable wipe providing consistent solvent application.

Supplier: Contec

Presaturated with IPA/DI water or 100% IPA.

Supplier: CONTEC, INC. MX

Amplitude™ Zeta™ wipes are a 5-ply, thermally bonded wipe which is comprised of a layer of cellulose sealed between two layers of meltblown polypropylene. This creates a material which is very absorbent and has a high level of cleanliness.

Supplier: Contec

PROSAT® Sterile Polypropylene wipes are presaturated with 70% denatured ethanol and 30% deionized water. The meltblown polypropylene wipes provide a consistent release of solvent to thoroughly remove surface contaminants in critical environments. These wipes are exceptionally clean and also free from additives of any kind. This particular meltblown polypropylene contains very low levels of sodium and other ions.

Supplier: Contec

PROSAT® Sterile Delta™ Wipes are made from a 100% nonwoven polyester fibers which are hydroentangled together using no binders or additives. The resulting fabric is extremely soft, clean, and strong.

Supplier: Contec

Amplitude™ Optic wipes are 100% nonwoven cellulose. The wipe consists of long staple fibers which are wet laid in a paper making process to form an extremely clean sheet. It features very low levels of extractables and only moderate particle generation. The wipe has a non-abrasive surface texture. The wipes are both absorbent and optical grade.

Supplier: ECOLAB LIFE SCIENCES

Klerwipe™ Low residue peroxide pouch wipes are ideal for routine or rotational use when cleaning and residue removal is required.

Supplier: CONTEC, INC. MX

StatZorb® Wipes are made from polyester fabric with a conductive fiber knitted in a specially designed grid pattern that minimizes 'hot spots'. The antistatic properties are uniform on both sides of the wipe. The surface resistivity is 4.3×107. The static decay time is less than 1.5 seconds.

Supplier: Contec

Polywipe Light Wipes are unlaundered standard weight interlock knit polyester wipes with knife-cut edges that can be used in less critical applications.

Supplier: CONTEC, INC. MX

Meltblown polypropylene wipes provide a consistent release of solvent to thoroughly remove surface contaminants in critical environments. PROSAT® presaturated wipes are exceptionally clean and also free from additives of any kind. This particular meltblown polypropylene contains very low levels of sodium and other ions.

Supplier: Contec

Polynit heatseal low endotoxin wipes are manufactured from high quality 100% knitted polyester fabric with sealed edges and produce low levels of particles and fibers. The polyester fabric offers the widest range of solvent compatibility. The wipes have a guaranteed endotoxin level of <1 EU/wipe and are validated sterile to 10⁻⁶ Sterility Assurance Level, making them ideal for use in product contact areas.