You searched for: Lids

Supplier: Ace Glass

For use with ground flat flange flasks

Supplier: Ace Glass

These 200mm PTFE heads allow for various combinations of jointed and/or compression fitting openings, as well as the ability to plug unused openings

Supplier: Ace Glass

KF Flange flat stainless steel head with holes to accept PTFE standard taper joint inserts.

Supplier: Ace Glass

PTFE bottom surface cover will protect stainless steel flat heads from chemical attack.

Supplier: JULABO

Condensation trap bath tank lid. Reduces/eliminates moisture condensation in bath fluid at <10 °C operation. Lid locks in place with fluid fill port and outlet for connection to nitrogen gas purge. Use with refrigeration models: 600F, 601F, 1000F, 1000FW.

Supplier: Sklar

The SklarLite™ Mid Size Rigid Sterilization Container Lids are available in a variety of colors.

Supplier: Sklar

Supplier: Sklar

Sklar's Instrument Tray Covers are seamless to prevent bacterial growth.

Supplier: Chemglass

Reaction vessel lids feature 30° angle side necks.

Supplier: Chemglass

These three neck reaction vessel lids have a flat ground surface allowing it to be greased or used with an o-ring.

Supplier: Chemglass

Reaction vessel lids feature 30° side necks.

Supplier: Chemglass

Reaction vessel lids feature five necks.

Supplier: Chemglass

Low profile five neck vessel lid to fit CG-1920 through CG-1936 vessels.

Supplier: Chemglass

Reaction vessel lid is constructed entirely of PTFE.

Supplier: Chemglass

Reaction vessel lid is constructed of ¹/₄" thick #316 S.S. with a ¹/₈" thick PTFE gasket underneath. The only material exposed to the reaction is PTFE.

Supplier: Chemglass

Constructed entirely of PTFE, these low-form lids have nine openings: a 2.5cm (1") female NPT center neck, three 2.5cm (1") female NPT vertical side necks, a 2.5cm (1") female NPT side neck with 10°x10° compound angle, and four 1.3cm (¹/₂") female NPT side necks

Supplier: Chemglass

Six-neck lid for 200 mm flanged vessel.

Supplier: HERAEUS MATERIALS TECHNOLOGY NA

Platinum crucible lids are designed for use with either the Heraeus line of Platinum Crucibles or the Platinum 95%/Gold 5% Crucibles.

Supplier: Chemglass

Reaction vessel lids feature five-necks.

Supplier: Chemglass

These four neck reaction vessel lids have a flat ground surface allowing it to be greased or used with an o-ring.

Supplier: Corning

With 24/29 Standard Taper Stopcock. They Require A Replacement 24/29 Standard Taper Stopcock With A Tooled Hose Connection. The Plug Material Is Ptfe.

Supplier: AGILENT TECHNOLOGIES (GENOMICS) CA

Universal lids and cap mats for square microplates.

Supplier: Chemglass

These five neck reaction vessel lids have a flat ground surface allowing it to be greased or used with an o-ring.

Supplier: Chemglass

Constructed entirely of PTFE, these low-form lids have eight openings: a 2.5cm (1") female NPT center neck, three 3.8cm (1¹/₂") female NPT vertical side necks, a 2.5cm (1") female NPT side neck with 10°x10° compound angle, a 3.8cm (1¹/₂") female NPT side neck at a 10° angle, and two 1.3cm (¹/₂") female NPT side necks

Supplier: Chemglass

Four neck vessel lid to fit CG-1920 through CG-1936 vessels.

Supplier: Retsch

For use in the GM 200 Laboratory Knife Mill. This piston-like lid is free-floating and drops under its own weight during the milling process to rest directly on the sample material at all times. It prevents the sample material from escaping the milling action.

Supplier: Chemglass

Reaction vessel lids feature 30° angle side necks.

Supplier: Chemglass

Constructed entirely of PTFE, these low-form lids have seven openings: a 1.9cm (³/₄") female NPT center neck, two 1.9cm (³/₄") female NPT vertical side necks, a 2.5cm (1") female NPT side neck with 10°x10° compound angle, and three 0.6cm (¹/₄") female NPT side necks

Supplier: Cytiva

Universal lids suitable for robotic handling. Can be used as dust covers and to prevent splashing or contamination when plates are being moved around the laboratory.

Supplier: QLA

QLA manufactures a wide selection of vessel covers for most dissolution testers.