You searched for: Petroleum Industry Standards

Supplier: Restek

Consists of three components, those are benzene, 2-butanol and toluene.

Supplier: Restek

Contains: Jet fuel A (64742-47-8)

Supplier: Restek

Contains: Kerosene composite (84742-81-0)

Supplier: Restek

The solvents consists of (C6) n-hexane (290 μg/ml), chloroform (60 μg/ml), 1,2-dimethoxyethane (100 μg/ml), 2-hexanone (50 μg/ml), nitromethane (50 μg/ml), pyridine (200 μg/ml), tetralin (100 μg/ml), trichloroethene (80 μg/ml).

Supplier: Restek

Standards are packaged in purge-and-trap-grade methanol at a concentration of 1000 µg/mL in a 1 mL ampoule.

Supplier: Restek

Prepared from an equal-volume blend from five gasoline-powered vehicles. After blending, a precisely weighed amount of the composite is added to a volumetric flask to produce the standard. Motor Oil standards may exhibit lot-to-lot variation.

Supplier: Restek

This TNRCC 1006 retention Ttme marker mix contains: (C6) n-Hexane, (C7) n-Heptane, (C8) n-Octane, (C10) n-Decane, (C12) n-Dodecane, (C16) n-Hexadecane, (C21) n-Heneicosane, (C28) n-Octacosane, (C35) n-Pentatriacontane.

Supplier: Restek

Standard ASTM D3606 Calibration 4 with MEK Internal Standard, (3 components),Benzene, Butanone (MEK), Toluene, Concentration in Solvent: In isooctane, Storage: 10 degree C or colder, Shelf Life: 6 months, Volume: 1 mL/ampule.

Supplier: Restek

Designed to serve as a column resolution text mixture, as well as a calibration mixture for retention time (RT) versus boiling point (bp) calibration.

Supplier: SPEX CERTIPREP LLC

Biodiesel Standards
Biodiesel Standards Designed for ASTM D6584 & EN14105

Biodiesel is fast becoming an environmentally friendly alternative to petroleum sources. This fuel source is obtained by esterification of oils derived from plants or animals. To meet the demands of this industry, SPEX CertiPrep offers Biodiesel Certified Reference Materials, as well as glyceride and FAME (Fatty Acids Methyl Esters) impurity standards; all designed to save time and money by eliminating the need to prepare in-house standards.

Our standards are manufactured from the highest purity starting materials and the highest grade of solvents available to guarantee superior quality. These standards are manufactured in a specially designed laboratory built to eliminate contamination issues that may arise during the manufacturing process. The standards then go through a rigorous QC process where a senior chemist approves each lot. This guarantees the standards are accurate and stable at the stated concentrations for all of the components. In addition, all standards are supplied with a detailed, comprehensive Certificate of Analysis.

For a custom standard quote, please visit spexcertiprep.com/customorganics.

Supplier: Restek

Subsurface degradation of fuel oil spills can be estimated by examining the ratios of C17/pristane and C18/phytane. To assist in identifying these four compounds from the complex fuel oil analysis, Restek offer a product that contains these compounds for retention time determination.

Supplier: Restek

The mix consists of, (C8) n-octane, (C10) n-decane, (C12) n-dodecane, (C16) n-hexadecane, (C21) n-heneicosane, (C34) n-tetratriacontane.

Supplier: Restek

Contains two components, those are n-hexadecane and stearic acid.

Supplier: Restek

Standard Oil & Grease Method 1664, 2 components, Concentration: 2,000 ug/mL each in acetone, Minimum shelf life: 6 months, Volume: 10ml/ampule

Supplier: Restek

Contains two components, those are benzene and toluene.

Supplier: Restek

Standards are packaged in methylene chloride at a concentration of 2000 µg/mL in a 1 mL ampoule.

Supplier: Restek

The mix consists of diesel fuel #2 composite, mineral oil.

Supplier: SPEX CERTIPREP LLC

Petroleum and LUST Standards

The EPA regulates the monitoring and testing of underground storage tanks (USTs), that were or are used to store petroleum or other hazardous substances, which could impact the environment and human health. Currently, there are over half a million registered underground storage tanks in the US alone. Many tanks installed prior to the mid-80s were composed of steel, which can corrode over time allowing for leakage into the surrounding groundwater and soil.

The Hazardous and Solid Waste Amendments to the Resource Conservation and Recovery Act (RCRA), passed in 1984, required the US Environmental Protection Agency (EPA) to develop regulations for the underground storage of motor fuels. The EPA requires owners and operators of USTs to maintain and clean up sites damaged by petroleum contamination.

SPEX CertiPrep provides standards designed to meet the testing requirements set up by the EPA and many individual state regulations for LUST and LUFT.

Supplier: Restek

For monitoring samples suspected of gasoline contamination requires laboratories to calibrate and report these compounds.

Supplier: Restek

The mix consists of (C5) n-pentane, (C9) n-nonane, (C10) n-decane, benzene, n-butylcyclohexane, 2,5-dibromotoluene, ethylbenzene, 2-methylpentane, methyl tert-butyl ether, naphthalene, toluene, 1,2,4-trimethylbenzene, 2,2,4-trimethylpentane, m-xylene, o-xylene, p-xylene.

Supplier: Restek

The glycol standard consists of two components they are ethylene glycol and propylene glycol.

Supplier: Restek

Standards are packaged in purge-and-trap-grade methanol at the stated concentrations in a 1 mL ampoule.

Supplier: Restek

Contains three components, those are benzene, 2-butanol (sec-butyl alcohol) and toluene.

Supplier: Restek

Leaking Underground Storage Tank (LUST) standards are packaged in methylene chloride at a concentration of 25 µg/mL in a 1 mL ampoule.

Supplier: Restek

Standard is packaged in purge-and-trap-grade methanol at a concentration of 2500 µg/mL in a 1 mL ampoule.

Supplier: Restek

These calibration mixtures are made with pure, highly characterized neat material and are prepared using NIST-traceable balances and weights. Each ampul is supplied with a data sheet indicating the exact concentration and a sample chromatogram.

Supplier: Restek

The mix consists of (C5) n-pentane, (C9) n-nonane, (C10) n-decane, benzene, n-butylcyclohexane, 2,5-dibromotoluene (SS), ethylbenzene, 2-methylpentane, methyl tert-butyl ether, naphthalene, toluene, 1,2,4-trimethylbenzene, 2,2,4-trimethylpentane, m-xylene, o-xylene, p-xylene.

Supplier: Restek

The MA VPH matrix spike mix consists of 14 components they are (C5) n-pentane, (C9) n-nonane, benzene, 2,5-dibromotoluene (SS), ethylbenzene, 2-methylpentane, methyl tert-butyl ether (mtbe), naphthalene, toluene, 1,2,4-trimethylbenzene, 2,2,4-trimethylpentane (isooctane), m-xylene, o-xylene and p-xylene.

Supplier: Restek

The mix consists of, (C8) n-octane, (C10) n-decane, (C12) n-dodecane, (C16) n-hexadecane, (C21) n-heneicosane, (C34) n-tetratriacontane, acenaphthene, acenaphthylene, anthracene, benz(a)anthracene, benzo(a)pyrene, benzo(b)fluoranthene, benzo(k)fluoranthene, benzo(ghi)perylene, chrysene, dibenz(a,h)anthracene, fluoranthene, fluorene, indeno(1,2,3-cd)pyrene, naphthalene, phenanthrene, pyrene.

Supplier: Restek

These solutions are prepared from a single-source (one-refinery) product. The weathered materials indicate the percent weight loss from the original material. Samples of regular- and premium-grade unleaded gasoline were collected, then blended in equal volumes.