You searched for: Fume Hoods and Enclosures

Supplier: Labconco

Guardian™ airflow monitors continuously check the face velocity of laboratory hoods and enclosures and alert the operator to airflows that drop outside preset levels with audible and visual alarms. The audible alarm can be muted at the touch of a switch.

Supplier: Labconco

This ventilated work area is ideal as a weighing station, light-duty fume hood, science classroom workstation, solvent cleaning work bay, or for veterinary pathology and cytology

Supplier: Labconco

The Guardian 500 Airflow Monitor is designed to continuously monitor airflow through Labconco fume hoods and other enclosures

Supplier: Labconco

Self-contained ductless enclosures allow safe handling of organic, formaldehyde, acid gas, sulfur compounds, or ammonia chemical fumes and vapors.

Supplier: Labconco

For use with Basic™ 47, Basic 70, Fiberglass 30, Protector® XStream®, Protector Premier™, Protector ClassMate®, Protector PVC Perchloric Acid, Protector Stainless Steel Perchloric Acid, Logic+, Logic, Cell Logic, PuriCare Procedure Stations and Protector Radioisotope laboratory hoods

Supplier: Environmental Express

Maintain clean air for more uniform digestions.

Supplier: Erlab

Erlab’s CaptairFlow Clean Air Enclosures are designed to prevent cross-contamination for applications such as non-pathogenic cell cultures, in-vitro cultures, microbiology, homeopathic preparations, electronics, and optics where product protection is required. They feature a high efficiency filtration system that provides a particle-free workstation around the manipulation, bringing HEPA filtered clean air down to the work surface.

Supplier: VWR International

These remote control fittings consist of a brass angle valve with replaceable seat, a nylon color-coded panel flange with angle serrated hose connector (except VFT-0864-3WV, which features a gooseneck), a remote control rod assembly with a plastic color-coded four-arm handle, black plastic angle flange, and a tank nipple, locknut, and washer

Supplier: VWR International

General purpose fume hoods that meet the typical needs of a research environment, while maintaining a level of flexibility. Ready for quick delivery through the REDISHIP program.

Supplier: VWR International

The VWR® PCR Workstation HEPA is a PCR enclosure for PCR sample preparation with an HEPA Filter. It offers dual-decontamination action by UV inactivation of airborne and surface-bound contaminants, therefore, representing an ideal environment for PCR set up and other sensitive protocols. In addition, the HEPA filter with UV provides a barrier against dust, bacteria and mould.

Supplier: Labconco

These low-profile enclosures provide user protection by keeping powders, particulates, and fumes contained during weighing procedures

Supplier: VWR International

The VWR® PCR Workstation offers twin decontamination action by UV inactivation of airborne and surface-bound contaminants, and therefore represents an ideal environment for PCR sample preparation and other sensitive protocols.

Supplier: Labconco

Popular models of Protector XStream Laboratory Hoods and supporting matching work surfaces (sold separately) are available from VWR® stock for immediate shipment

Supplier: Labconco

There are many accessories available for customizing Protector® Laboratory Hoods including Service Fixture Kits, Duplex Receptacle Kits and Guardian™ Airflow Monitors.

Supplier: Labconco

Popular models of Protector® Premier® Laboratory Hoods and supporting matching work surfaces (sold separately) are available from VWR® stock for immediate shipment

Supplier: Labconco

Fully-featured, energy-efficient fume hoods provide an environmentally-friendly solution to ducted fume hoods while simplifying installation due to their compact footprint.

Supplier: Labconco

These portable systems provide user protection by keeping powders and particulates contained during weighing procedures

Supplier: Heidolph NA, LLC

User-friendly safety enclosure for use with Rotary Evaporators

Supplier: Bel-Art Products, a Part of SP

This fume hood includes a flat internal baffle across the rear of the shell that slopes forward, leaving space beneath for air flow to sweep the deck, and space above in order to efficiently remove airborne vapors.

Supplier: Bel-Art Products, a Part of SP

The translucent polypropylene plastic hood is non-conductive, chemical-resistant and corrosion-proof.

Supplier: Labconco

Provides a non-ventilated, circulation-free work area designed to reduce cross-contamination during polymerase chain reaction (PCR) experiments. The unit is constructed of UV-resistant, glacier white, dry powder epoxy-coated aluminum and steel with 0.6cm (¹/₄") tempered safety glass sash and sides. Angled, hinged sash features a 19.8cm (7¹³/₁₆") high opening for closer, more comfortable viewing than vertical sashes, and an interlocked UV protection panel that must be in place to turn on UV light but can be removed when the light is off for full access to enclosure opening.

Supplier: Erlab

Erlab’s Captair Ductless Filtering Fume Hoods and Powder Weighing Stations are 100% ductless, meaning no HVAC connection to the outside is required. Some models can be placed on mobile bases to be wheeled around, or shared between laboratories. The units offer end users protection from particulate, and or liquid handlings. Units are also cleanroom compliant with HEPA at the exhaust. Customers can weigh down to six decimal places without interruption of the scale.

Supplier: Bel-Art Products, a Part of SP

This fume hood features a one-piece shell molded of polyethylene plastic with a clear acrylic sash that slides on inside tracks.

Supplier: Labconco

Designed for research, educational, and clinical applications requiring small working space and efficient fume removal. Fire- and chemical-resistant, one-piece molded fiberglass interior and pre-set baffle have a flame-spread index less than 25 per ASTM E-84. All models feature a pivoting airfoil that promotes airflow.

Supplier: Labconco

These kits let the user mount glassware and other small apparatus to the rear of the hood’s interior, above the work surface to maximize usable working area.

Supplier: Kewaunee

Air Alert 300 Face Velocity Airflow Alarm consists of a thermistor sensor mounted through the end wall of the hood, and a control monitor that gives both a visual and an audible alarm.

Supplier: Mettler Toledo

METTLER TOLEDO Enclosures by Labconco are specifically designed to protect the analyst during the weighing process

Supplier: Bel-Art Products, a Part of SP

These corrosion-proof polypropylene plastic exhaust hoods are designed to rest on the rear edge of tanks and draw a stream of air across the top of the tank away from the operator.

Supplier: Bel-Art Products, a Part of SP

Safely vent noxious or potentially hazardous fumes and dust using Scienceware® Clear View Fume Hoods.

Supplier: Labconco

These stations provide user protection by keeping powders and particulates contained during weighing procedures