U hebt gezocht naar: Benodigdheden voor chromatografie

Supplier: VWR Collection

Chromaster, Chromaster HPLC-interfacebesturingsbord voor besturing van de Chromaster. USB-kabel en E-line-kabel (0,5 m) meegeleverd. Ingebouwd in het automatische monsternameapparaat bij installatie in het laboratorium. Als er geen autosampler wordt gebruikt, dient in plaats daarvan de interfacebox (S) te worden besteld.

Supplier: Merck

Merck-kolommen zijn verkrijgbaar in drie formaten.

Supplier: Merck

These SPME fiber assemblies can be reused for up to 100 analyses depending on the application.

Supplier: Trajan Scientific and Medical

* Gasdicht.

Supplier: Bohlender

For easy bundling and fixing of signal cables, grounding cables, waste tubes, and vent tubes inside of safety cabinets and built-in installations.

Supplier: S.C.A.T.

The HPLC Supply Sets, V2.0 of the premium manufacturer SCAT are attractively priced combinations of equipment for contamination-free supply of HPLC systems with solvents. The sets each consist of a laboratory bottle with GL 45 thread, a SCAT SafetyCap as well as matching capillaries, suction filters and air valves.

Supplier: VWR Collection

ChromasterUltra Rs, ChromasterUltra Rs-zuiger voor 6170 binaire pomp

Supplier: VWR Collection

These spare parts are suitable for certain HPLC pumps.

Supplier: VWR Collection

This spare part is suitable for Chromaster 5210 and 5260 autosamplers. For Chromaster 5210 AS from Serial No. 1309-001 and 1309T-001 onward. For Chromaster 5260 AS from Serial No. 1205-001 and 1205T-001 onward.

Supplier: VWR Collection

Primaide™, Primaide™ HPLC-oplosmiddelontgasser, Voor: Primaide™ PM1110-pompen

Supplier: Avantor

J.T.Baker®, Adapter, blauw, om reservoir of Luer-tip aan PP SPE-kolommen vast te maken

Supplier: Trajan Scientific and Medical

Spuiten voor automatische monsternemer. Voor AOC14, AOC17 en AOC20

Supplier: S.C.A.T.

SCAT-labinstallaties kunnen volledig in het laboratoriummeubilair worden geïntegreerd en bieden een gasdicht systeem voor veilig beheer van vloeistoffen.

Supplier: VWR Collection

Pushing screw

Supplier: VWR Collection

Maintenance parts kit for Chromaster HPLC 5210/5260 autosamplers, type B. Kit contains 1× injection port seal 893-0810, 1× injection valve seal (PEEK) 893-0809, 1× syringe valve seal 893-0814, 1× syringe tip, 175 µl 893-0808

Supplier: Merck

SPME-GC inlet liners are designed for optimum sample introduction for specific injection techniques that are suitable for Agilent, Perkinelmer, Shimadzu, Finnigan, Varian and Thermo scientific equipped with split/splitless inlets.

Supplier: Bohlender

Integrate b.safe system caps and b.safe funnels in laboratory hoods or working tables. Liquid solvent waste can be lead directly into canisters via b.safe waste pipes.

Supplier: Bohlender

Set consisting of (1) base plate with female thread M8, (1) threaded rod M8, length 200 mm, (1) pipe clamp with female thread M8 for tube ext.Ø 32 mm, and fastening material for assembly on walls or under desktops.

Supplier: Trajan Scientific and Medical

Spuiten voor automatische monsternemer voor PerkinElmer AutoSystem.

Supplier: S.C.A.T.

The HPLC Supply and Waste Disposal Set V2.0 is the ultimate and universal set of all required components for solvent supply and waste of all HPLC/UHPLC systems.

Supplier: HAMILTON BONADUZ

The Neuros™ adapter kit attaches to any 5,0 to 100 µl removable needle (RN) syringe.

Supplier: Bohlender

Complete set for equipping one HPLC system.

Supplier: S.C.A.T.

The HPLC waste-sets, V2.0 are economical combinations for clean and safe disposal of liquid laboratory waste by HPLC systems or other analytical instruments. All sets consist of a canister and an original SCAT SafetyCap with exhaust filter as well as fittings, blind plugs and a tube connector.

Supplier: Trajan Scientific and Medical

* Gasdicht.

Supplier: S.C.A.T.

The ready-to-use automatic switching sets prevent the overflowing of disposal containers and the associated leakage of hazardous, toxic, or explosive liquid waste.

Supplier: S.C.A.T.

These safety funnels and containers are used all over the world wherever the safe disposal of liquid waste is important. To ensure that collection points are also quickly ready for use, the most popular products have been assembled as sets. This requires only one part number for the comprehensive safety system, guaranteed compatible without time-consuming assembly of individual components.

Supplier: Trajan Scientific and Medical

Spuiten voor automatische monsternemer voor HP7673, 7683, 7693A en 6850ALS.

Supplier: Bohlender

HPLC sets for solvent supply containing b.safe caps GL 45 for four bottles, PFA-fittings for capillaries with Ext.Ø. 3,2 mm, blind fittings made of PFA to close unused connections as well as air valves with service life indicator.

Supplier: Trajan Scientific and Medical

SilFlow™ microchannel device (MCD) options for three-port GC splitters, four-port GC splitters and a Deans' switch MCD, perfect for multi-dimensional analyses. SilFlow™ can be incorporated into the system without impacting the chromatography.

Supplier: Merck

FocusLiner™ inlet liners are designed with wool plug to promote the rapid vaporisation of the entire sample, minimise mass discrimination, and prevent non-volatile material from entering the column. It incorporates a unique design to prevent the shifting of the wool plug during repeated injections or sudden inlet pressure changes. These liners are suitable for Agilent, Perkinelmer, Shimadzu, Finnigan, Varian and Thermo scientific equipped with split/splitless inlets.